Electricians in Milton Keynes: what your estate house needs after an EICR
If you need an electrician in Milton Keynes for an estate house from the city's early decades, start with an EICR (electrical condition report), not a rewire quote. These homes were mostly wired in PVC cable, which ages well. EICRs on them usually find missing RCD protection, an older board, main bonding that needs bringing up to standard, or circuits a previous owner added.
- If you need an electrician in Milton Keynes for an estate house built in the city's early decades, start with an EICR (electrical installation condition report).
- Most of these homes need targeted fixes, not a rewire.
- They were mostly wired in PVC cable, which holds up well.
- The things a test usually turns up are smaller: no RCD protection on some circuits, an older fuse board, main bonding that is not up to standard, or circuits a previous owner added without paperwork.
- I am Brady Lewis, a qualified electrician and director at Excel Electrical.
- We are based at Olney and test houses across Milton Keynes every week, from Netherfield and Fishermead to Great Linford, Neath Hill and Bradwell Common.
- This article answers the questions buyers and owners ask us, in the order they usually ask them.
Do I need an electrician to check a house I am buying in Milton Keynes?
It is not a legal requirement for a sale between owner-occupiers. It is still sensible. Electrical Safety First's advice for home buyers recommends having the electrics checked by a registered electrician before you buy. Electrical work can be expensive to put right, and you want to know about it while you can still negotiate.
The check you want is an EICR. The electrician inspects the board, a sample of sockets, switches and fittings, and tests each circuit. You get a written report with codes against anything that falls short. If you are already in the house and want one done, our EICR page explains what the visit involves.
Does a house survey check the electrics?
Not in any depth. A surveyor looks at what they can see, such as the age and type of the board and any obvious damage. They do not test circuits. That is why survey reports so often say "recommend inspection by a qualified electrician". That line is not the surveyor covering themselves. It is the only honest thing they can say without test equipment.
What electrical documents should I ask for when buying?
Ask the seller, through your conveyancer, for any paperwork for electrical work done since they moved in. The main items are:
- Electrical Installation Certificates for new circuits, board changes or rewires.
- Minor Works Certificates for smaller jobs, such as an added socket or light.
- Building Regulations compliance certificates for notifiable work. Under Approved Document P, jobs like a new circuit or a board replacement must be notified to building control, usually through a registered competent person scheme.
- Any previous EICR, with its date.
On Milton Keynes estates the gap we see most often is the extension, conservatory or garage conversion with no paperwork for the wiring. That does not mean the work is bad. It means nobody can show it was tested.
Does a 1970s or 1980s Milton Keynes house need rewiring?
Usually not. Electrical Safety First answers this directly in Does a 1980s house need rewiring?. Condition matters more than age. A house from that era that tests well does not need rewiring just because it is old.
The houses that do need rewiring are older ones, with rubber or lead-sheathed cable that breaks down over time. Most of the city's early estates do not have that problem. What they have is a board and protection designed to the rules of the time, which have changed a lot since.
What does an EICR usually find on a Milton Keynes estate house?
The same few things come up again and again on houses from this era:
- No RCD protection, or only part of it. An RCD switches the power off fast if current leaks to earth, for example through a person. Older boards often have rewireable fuses or circuit breakers with no RCD at all.
- Main bonding not up to standard. This is the green and yellow earth cable connecting the gas and water pipes to the main earth. On many estate houses the gas meter is in an outside box, and the bonding is missing, too thin or connected in the wrong place.
- Additions by previous owners. These include extra sockets in garages, outdoor sockets, garden lighting and kitchen extensions, sometimes wired off whatever circuit was nearest.
- Worn or damaged fittings. Cracked sockets, scorched plug tops, and old light fittings with no earth.
Plastic consumer units also come up. The current BS 7671 wiring regulations require new boards in homes to have a non-combustible enclosure. An existing plastic board in good condition is not automatically dangerous, though, and is not on its own a reason to replace it.
What do C1, C2, C3 and FI mean on my report?
Every observation on an EICR gets a code. The codes are set out in the model forms in BS 7671:
- C1, danger present. Someone could be hurt now. The electrician should make it safe before leaving, usually by isolating that circuit.
- C2, potentially dangerous. Not dangerous right now, but it could become so. It needs putting right soon.
- C3, improvement recommended. It does not meet current standards, but it is not unsafe.
- FI, further investigation. The electrician has seen something that needs looking into before it can be given a code.
Any C1 or C2 makes the report unsatisfactory. Here is the part some firms will not tell you. If your report comes back with C3s only, it is satisfactory. You do not need a new board or a rewire, and anyone quoting one off a C3-only report is selling, not advising. You can choose to do the C3 items when convenient, such as when you redecorate or change the kitchen. Nothing forces you to.
Board change, remedials or nothing: how is it decided?
The codes decide it, not the age of the house. Roughly:
- Nothing. A satisfactory report, with C3s at most.
- Remedials. A few C2s on fittings, bonding or one added circuit. We fix those items and issue the right certificate. Many reports end here.
- A board change. This makes sense when there is no RCD protection and the board cannot sensibly take it, or the board itself is damaged. Before fitting a new board we test the circuits. A new board with RCDs will trip on any existing earth leakage, so faults have to be found first.
- A partial rewire. This is usually one bad circuit, often a later addition, rather than the whole house.
A full rewire on a Milton Keynes estate house is the exception. If someone recommends one, ask which observations on the report support it. If you need power at home again after a trip and the report is not due yet, you can reset a tripped RCD or breaker once. If it trips again, leave it off and call an electrician.
What goes into the quote for the work?
We do not publish prices, because two houses on the same street can need very different work. What changes a quote is:
- Number of circuits. More circuits means more to test, label and connect.
- What the testing finds. Faults found before a board change are fixed first, and are listed separately so you can see them.
- Bonding runs. A short run to a meter next to the board is a different job from a cable run to an outside meter box or across a floor.
- Access and making good. Lofts, floor voids, fitted kitchens and finished plaster all matter. We say clearly whether filling and decorating are included.
- Certification and notification. As an NICEIC Approved Contractor we notify notifiable work through our scheme, so you get the certificate and the Building Regulations compliance certificate without a separate building control application.
A quote based on your actual EICR is more accurate than one based on a phone description. If you have a report from another firm, send it over and we will quote from it.
We cover all of Milton Keynes, including Bletchley, Wolverton, Stony Stratford and Newport Pagnell. Our Milton Keynes page lists the work we do locally. To book an EICR or get the follow-on work quoted, use our quote form or call 01908 464338.
Brady Lewis, qualified electrician and director, Excel Electrical
Questions we get asked about this
Do I need an EICR if I'm buying a house?
It is not legally required when buying from an owner-occupier, but Electrical Safety First recommends a check by a registered electrician. It tells you what work, if any, the house needs before you commit.
Does a house survey check the electrics?
Only visually. A surveyor does not test circuits, which is why most surveys recommend an inspection by a qualified electrician.
What do C1, C2 and C3 mean on an EICR?
C1 means danger present, C2 means potentially dangerous, and C3 means improvement recommended. Any C1 or C2 makes the report unsatisfactory. C3s alone do not.
Does a 1980s house need rewiring?
Not usually. Electrical Safety First says condition matters more than age, and a 1980s house that tests well does not need rewiring. Typical work is RCD protection, bonding or fixing added circuits.
What electrical documents should I ask for when buying a house?
Ask for Electrical Installation Certificates, Minor Works Certificates, Building Regulations compliance certificates for notifiable work, and any previous EICR.
- Electrical Safety First - Advice for home buyers, electricalsafetyfirst.org.uk
- Electrical Safety First - Does a 1980s house need rewiring?, electricalsafetyfirst.org.uk
- GOV.UK - Approved Document P: Electrical safety, Dwellings, gov.uk
- GOV.UK - Building regulations and approved documents index, gov.uk
- IET - BS 7671 Wiring Regulations, electrical.theiet.org
Checked on 18 November 2026. Regulations change, so if you are reading this a long way after that date, ring us and we will tell you what has moved.
Read this next
Electrical installation and maintenance in Milton Keynes: what a business needs
What electrical maintenance actually means for a Milton Keynes shop, office or unit: the legal duty, how often to inspect, who is responsible and whether you need a contract.
EICRsMissing gas and water bonding on an EICR: what does it mean?
What main bonding is, how an EICR codes it, what does not need it, and why it rarely means a new board.
Social housingSocial housing electrical contractors: how to choose one for your EICR programme
A qualified electrician's guide for councils and housing associations in Bucks, Beds, Northants and London on choosing and scoping a contractor for EICRs and remedials.